| Customization: | Available |
|---|---|
| After-sales Service: | Online/Video/Telephone Guidence |
| Warranty: | 18 Months |
|
Still deciding? Get samples of US$ 43.6/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The smart water meter of the Internet of Things is composed of dry water meter base meter, electric ball valve, magnetic resistance sensor, MCU, lithium sub-battery pack, LoRaWAN wireless communication module, control circuit and other components. It adopts the electromechanical separation structure design. It has the advantages of long communication distance, large capacity, fast and convenient installation, and long service life.
1. Split structure: the electronic units are relatively independent of the base table.
2. Accurate measurement: using non-contact electronic detection logic and measurement accuracy of 10 liters to ensure the mechanical and electrical consistency.
3. It has the function of touch button wake-up and long press on the button to immediately go online remote data transmission.
4. It has an infrared communication interface, which can read and set relevant parameters.
5. It has various alarm functions: abnormal state, measurement fault, abnormal battery voltage, abnormal valve, etc.
6. LoRaWAN timing uploading function: automatically upload data at set time points (once a day by default), and also receive and execute valid instructions from the platform.
7. Micro-power consumption design: Adopt 3.6V lithium sub-battery pack (ER26500 + HPC1520), with dormant current <10uA.
8. Clock calibration function: Automatic calibration function and remote calibration function of platform after the water meter is connected to the network.
|
Nominal caliber (mm)
|
15
|
20
|
25
|
|
Overload flow Q4(m3/h)
|
3.1
|
5.0
|
7.8
|
|
Commonly used flow Q3(m3/h)
|
2.5
|
4.0
|
6.3
|
|
R=Q3/Q1
|
100 (Dry Type)
|
||
|
Range ratio
|
Q2/Q1=1.6 Q4/Q3=1.25
|
||
|
Pressure loss level
|
Δp <=0.063M P a
|
||
|
Maximum allowable water pressure
|
<=1.2MPa
|
||
|
temperature grade
|
T30/T90
|
||
|
Flow characteristics
|
Comply with GB / T 778.1~3-2007 standard, accuracy level: level 2
|
||
|
Maximum allowable error
|
The high area (Q2 Q Q4) is ± 2%, and the low area (Q1 Q <Q2) is ± 5%
|
||
|
Water meter type
|
Electronic remote transmission water meter with electronic device
|
||
|
design criteria
|
CJT224-2012 Electronic Remote Water ter
|
||
|
Communication mode
|
LoRaWAN:CN470,RU864,IN865,EU868,US/AU915,KR920,AS923_1/2/3/4,Custom Channels
|
||
|
quiescent current
|
<10uA
|
||
|
Communication current
|
Data collection and generating currents <50mA and peak current <100mA
|
||
|
work environment
|
0~ + 45ºC (cold water)
0~ + 90ºC (hot water)
0~95%RH
|
||
|
working voltage
|
2.7~3.6 V
|
||
|
operative norm
|
GB/T 778-2018
|
||
Under the normal state, the water meter will be automatically put online once a day (settable). Through wireless communication, the water meter data will be uploaded to the system platform, and the relevant instructions of the system platform (parameter setting and valve control, etc.) will be received and executed at the same time.
There are touch buttons on the water meter housing. In the dormant state of the water meter, touch the button area with your finger, the red status light on the water meter will flash a little (infrared interface area), the water meter is artificially awakened and in the infrared communication state. If you continue to touch the button (3 seconds), the red indicator of the water meter will flash two times in a row, at this time the water meter will immediately go online (connect to the platform), upload the current data to the system platform and receive the instructions of the platform. The water meter in the process of uploading data, the red indicator will also flash many times in a row. After the meter data is uploaded, it will immediately enter the sleep state (low-power mode).
|
Model
|
Nominal caliber (mm)
|
L
(mm )
|
B
(mm )
|
H
(mm )
|
Take over control
|
Nut
|
|
LX SY -15
|
15
|
165
|
100
|
140
|
R1/2
|
G3/4
|
|
LX SY -20
|
20
|
195
|
100
|
140
|
R3/4
|
G1
|
|
LX SY -25
|
25
|
225
|
100
|
140
|
R1
|
G11/4
|
l. Water meters should be checked frequently to prevent water meter leakage accidents.
lI. In winter, it is necessary to prevent the water meter from freezing and bursting. Installing insulation measures to the water meter when necessary.
lII. When the home is not occupied for a long time, should close the valve in front of the table to prevent water leakage accidents.
lV. Water meter is a measuring product and shall not be destroyed. Destroying water meter is an illegal action.
LoRaWAN Smart Water Meter: The Future of Water Management
Our LoRaWAN Smart Water Meter represents a leap forward in water management technology. This state-of-the-art device combines the groundbreaking LoRaWAN protocol with advanced metering technology to deliver real-time, secure, and accurate water usage data.
Long-Range Communication: Our device uses LoRaWAN, a low-power, wide-area network protocol, designed to communicate over several kilometers in rural areas and several hundred meters in urban settings. This ensures reliable data transmission, no matter where your meter is located.
Low Power Consumption: The Smart Water Meter operates with minimal power, making it ideal for locations where electricity supply may be unreliable. Thanks to this feature, the meter can run for years on its battery before requiring a replacement.
Real-Time Data Monitoring: Stay informed about your water usage with real-time data updates. Our smart water meter helps you identify leaks, conserve water, and manage your water usage more efficiently.
Secure Data Transmission: Your data's security is our top priority. That's why our smart water meter uses AES-128 encryption, ensuring your data remains safe and confidential.
Scalability: With the ability to support millions of devices, the LoRaWAN Smart Water Meter can be deployed across wide areas. This makes it an ideal choice for both individual and commercial usage.
Geolocation Capabilities: Our smart water meter offers geolocation data, helping you easily locate your meter or detect any unauthorized movement.
Bi-Directional Communication: Not only can the smart water meter send data to the network, but it can also receive important information, such as firmware updates or specific commands, ensuring your device is always up-to-date and functioning optimally.
Embrace the future of water management today with our LoRaWAN Smart Water Meter. It's not just a product; it's a solution for efficient, secure, and intelligent water management.
Wuhan Timewave IoT Technology Co., Ltd. is a high tech enterprise specializing in the application of Low Power Wide Area Network (LPWAN) core technologies to establish an energy monitoring service platform. We provide a one-stop solution and service for our clients, offering metering and communication equipment, software system platforms, project construction, and daily operation and maintenance.
We independently develop and manufacture the "Timewave" brand LPWAN smart energy meters, smart water meters, smart gas meters, and alarm systems, among other communication terminal products. Coupled with the "Timewave Cloud" energy supervision platform, which encompasses metering, meter reading, billing, management, and control of water, electricity, gas, and heat, we can provide and implement automatic meter reading and billing, carbon emission monitoring, safe electricity use, energy consumption analysis, energy-saving analysis, transformer monitoring, data center environment monitoring, and intelligent operation and maintenance. We have a wealth of experience in the practical application of water and electricity meters using LoRaWAN technology.
The "Timewave Cloud" energy supervision platform is widely used in various settings, including campuses, supermarkets, apartments, hospitals, factories, parks, buildings, railways, airports, data centers, and more.We have connected over 200,000 IoT terminals, implemented over 200 projects, and expanded our reach to over 30 provinces and cities across the country. Moreover, we provide operation and maintenance support for ground projects in multiple countries and regions, including Indonesia, Turkmenistan, Laos, Nigeria, and Mongolia.
Timewave IoT Technology is committed to solving issues related to difficult meter reading, billing, payment, energy-saving and efficiency improvement, and safe energy use. We aspire to become a leader in the field of energy IoT and energy supervision platforms.
){kind=link}