| Customization: | Available |
|---|---|
| Communication Method: | Lorawan/Cat. 1/Nb |
| Display Method: | Digital |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Type YW-TW intelligent gas meter based on the IoT adopts LoRaWAN/CAT. 1/NB (optional) wireless transmission technology. Automatically upload gas consumption data to the application platform to realize remote monitoring of gas meter usage status. It solves the problems of the traditional gas meter, such as the difficulty of over-reading the meter at home, the difficulty of paying the fee, and the inaccuracy of the supply and marketing difference.Explosion-proof sign ExibIIBT3 Gb. It is applicable to Zone 1 and Zone 2, containing IIA-IIB and T1-T3 explosive gas mixture.
1. Adopt LoRaWAN/CAT. 1/NB (optional) wireless technology. Effectively increase the anti-interference ability of the communication system and improve the accuracy of the received data;
2. The gas meter adopts the form of system prepayment. The valve switch of the gas meter is realized by the command from the system platform;
3. Timing (once a day) (settable) and key wake-up to transfer data to the platform. It improves the response speed of meter reading and reduces battery energy consumption;
4. When the voltage is low or abnormal, the LCD screen will automatically display the fault information, beep the alarm, and close the valve;
5. It has a built-in antenna. The transmission signal is stable and reliable;
6. The platform can remotely check the user's gas consumption, battery usage, and remotely control the valve switch of the gas meter;
7. It has the function of pulse signal open circuit self-inspection, which can effectively ensure the accuracy of gas meter measurement;
|
Parameter
|
G(J)4 Explain:G is aluminum shell , J is an iron shell
|
|
Nominal flow(m³ /h)
|
4 |
|
Maximum flow(m³ /h)
|
6.0 |
|
Minimum flow(m³ /h)
|
0.040 |
|
Working Pressures(kPa)
|
≤30
|
|
Total Pressure Loss(Pa)
|
≤250
|
|
Accuracy Level
|
1.5 Class
|
|
Basic Error Lines
|
qmin≤q< qt ±3.0% qt≤q≤qmax ±1.5%
|
|
The tightness of the machine
|
It can last for 3 minutes without leakage under 1.5 times of the maximum working pressure
|
|
Operating Ambient Temperature(ºC)
|
-25ºC~ +40ºC
|
|
Inlet and Outlet Connector Threads
|
M30×2
|
|
Maximum Display Capacity of LCD(m³ )
|
999999 |
|
Maximum reading of base meter(m³ )
|
99999.999
|
|
Power supply mode
|
Four AA Alkaline dry batteries(AA LR6 1.5V)
|
|
LoRaWAN frequency band (MHz)
|
IN864-865
|
|
Barrier-free meter reading distance
|
>3000m
|
|
Compliant standards
|
GB/T 6968-2019,GB/T 3836-2021
|
•Consumption: cumulative consumption of gas meter
| Parameter |
W(mm)
|
W1(mm)
|
H(mm)
|
CC(mm)
|
L(mm)
|
| G4 | 172 | 72 | 259 | 130 | 192 |
1. The installation shall be carried out in accordance with GB/T 3836.15-2017 Explosive Atmospheres - Part 15: Design, Selection and Installation of Electrical Installations. The installation of meters shall be carried out by professionals of the gas company for initial installation and commissioning.
2. This product has undergone explosion-proof treatment and shall not be changed at will.
3. The product shall not be collided or severely impacted during transportation, and shall be protected from rain and sand.
4. This product should be stored in a ventilated and dry place.
5. It is prohibited to detect leakage in case of open fire. When piloting fire, the air in the gas meter must be exhausted to prevent accidents.
6. When installing the battery, note that the side with the spring is the negative pole of the battery. The battery shall be replaced under the condition of good ventilation and no gas leakage.
7. Electrostatic hazard, so must be wiped with wrung wet cloth.
1.It is not allowed to replace components or structures that affect the explosion-proof performance at will, so as not to affect the explosion-proof performance.
2.Warning sign: Potential electrostatic charge is dangerous. During the normal use, maintenance and cleaning of gas meters, we should avoid the ignition hazard caused by electrostatic charges. Do not touch and wipe the equipment when it is used in explosive environment. If it is necessary to wipe and touch, it should be carried out in a well-ventilated, no gas leakage place. Wipe the shell with a wrung wet cloth. And it is strictly forbidden to wipe the shell with a dry cloth!
3.The battery must be replaced with the same type of battery under the condition of good ventilation and no gas leakage.
Wuhan Timewave IoT Technology Co., Ltd. is a high tech enterprise specializing in the application of Low Power Wide Area Network (LPWAN) core technologies to establish an energy monitoring service platform. We provide a one-stop solution and service for our clients, offering metering and communication equipment, software system platforms, project construction, and daily operation and maintenance.
We independently develop and manufacture the "Timewave" brand LPWAN smart energy meters, smart water meters, smart gas meters, and alarm systems, among other communication terminal products. Coupled with the "Timewave Cloud" energy supervision platform, which encompasses metering, meter reading, billing, management, and control of water, electricity, gas, and heat, we can provide and implement automatic meter reading and billing, carbon emission monitoring, safe electricity use, energy consumption analysis, energy-saving analysis, transformer monitoring, data center environment monitoring, and intelligent operation and maintenance. We have a wealth of experience in the practical application of water and electricity meters using LoRaWAN technology.
The "Timewave Cloud" energy supervision platform is widely used in various settings, including campuses, supermarkets, apartments, hospitals, factories, parks, buildings, railways, airports, data centers, and more.We have connected over 200,000 IoT terminals, implemented over 200 projects, and expanded our reach to over 30 provinces and cities across the country. Moreover, we provide operation and maintenance support for ground projects in multiple countries and regions, including Indonesia, Turkmenistan, Laos, Nigeria, and Mongolia.
Timewave IoT Technology is committed to solving issues related to difficult meter reading, billing, payment, energy-saving and efficiency improvement, and safe energy use. We aspire to become a leader in the field of energy IoT and energy supervision platforms.
){kind=link}